Yet another way to play with wool
Until today, I’d never ventured into weaving.
I always thought “Geez, looms look like such big, complicated machines” and “Man, it must be a bugger to warp one of those things”.
I’d looked at some of the small rigid heddle looms that a lot of spinning wheel manufacturers have on the market,, but they run about $200, and that seems like a lot of cash to drop to just “give it a go”.
Then other day I was poking around on the web, and I happened upon a plan for a simple loom.
I read it, and it actually made sense to me (helped that it had pictures). I thought “Hey, I could do that just just materials we already have around the house”.
This is just the frame with the warp yarn wrapped on it.
Before you can do any weaving, there are a couple more steps you need to take-
First, you need to tie the warps together so they are all laying in the same plane (at least on the end you’re working from)
Then you need a “shed” board-
and a heddle, so you can easily lift every other warp yarn to create a plain weave cloth.
The shed is easy- just place a lath-type piece of wood in the opening between the warp yarn layers on the far side of the frame. The heddle are a little (but not much) more work. You cut and tie loops of string for each of the lower strands of warp,
and then load them on a dowel (or PVC, if that’s what you’ve got hanging around),
Then magically, when you lift the bar, the lower strands rise too, and create a nice little space for you to pass your weft through! Neat, eh?
You also need something to press your newly-passed through weft yarn down next to the last one. For this, I’ve been the using the tine end my diz, who happens to also be a spork (seen in a couple photos above).
Who’da thunk that this modest little lunchbag utensil would have such extensive fibercrafting potential?
That’s all for now-